-
Key Features:
-Power rating
61509/61609: 6kVA
61508/61608: 4.5kVA
61507/61607: 3kVA
-Voltage range: 0-175V/0-350V/Auto
Frequency: DC, 15Hz-2kHz
Single-phase or three-phase output
selectable
Programmable slew rate setting for changing voltage and frequency
Programmable voltage and current limit
High output current crest factor inrush current testing
Turn on and turn off phase angle control
TTL signal which indicates output transient
LIST, PULSE, STEP mode functions for testing Power Line Disturbance (PLD) simulation
Voltage dips, short interruption, and voltage variation simulation
Harmonics and inter-harmonics waveform synthesizer
Comprehensive measurement capability including current harmonics
Analog programmable interfaces
Remote interface: GPIB, RS-232, USB, and Ethernet
Higher output power capability by implementing master-slave parallel output function
-
Key Features:
-61800 series optional function
-Operating voltage: 50~300VLN
-Operating frequency: 30~100Hz
-Support CC rectified mode, CP rectified mode, CR mode, CC phase lead/lag mode and CP phase lead/lag mode
-
Key Features:
-Power Rating : 1800W, 3600W, 4500W
-Voltage Range : 50V ~ 350Vrms
-Current Range : Up to 18Arms, 36Arms, 45Arms
-Peak Current : Up to 54A, 108A, 135A
-Parallel / 3-Phase Function
-Frequency Range : 45 ~ 440Hz, DC
-Crest Factor Range : 1.414 ~ 5.0
-Power Factor Range : 0 ~ 1 lead or lag (Rectified mode)
-CC, CR, CV, CP for DC Loading
-Constant & Rectified Load Modes for AC Loading
-Analog Voltage & Current Monitor
-Timing Measurement for Battery, UPS, Fuse and Breaker tests
-Measurement : V, I, PF, CF, P, Q, S, F, R, Ip+/- and THDv
-Short circuit simulation
-Full Protection : OC, OP, OT protection and OV alarm
-
Key Features:
-Rated power: 250W, 350W
-Voltage range: 150V
-Current range: 60A max.
-CC, CR, CV & CP operation modes
-User-defined waveforms (UDW)
CZ mode for turn on capacitive loadsimulation
Standard USB, optional Ethernet and GPIB interfaces
-
Key Features:
-Max. Power : 100W x 2(Dual), 300W & 400W
-Voltage Range : up to 600V
-5 module mainframe Max. 2000W, load modules up to 400W/ea
-Up to 10 channels in one mainframe, fit for testing multiple output SMPS
-0.4V @ 80A (Typical) low voltage operating characteristics
-Flexible CC, CR, CV and CP operation modes
-CZ mode for turn on capacitive load simulation
-Parallel mode for high current and power application up to 2kW
-User defined waveform
-Multi Channel synchronous control
-Auto frequency sweep up to 50kHz
-Real time power supply load transient response simulation and Vpk+/- measurement
-User programmable 100 sequential front panel input status for user-friendly operating
-Precision voltage and current measurement
-Precision high speed digitizing measurement/data capture
-Voltage, Current and Pmax measurement for OCP/OLP testing
-Timing measurement for batteries
-Short circuit simulation
-Self-test at power-on
-Full Protection : OC, OP, OT protection and OV alarm
-Ethernet, USB and GPIB interfaces