| Specification |
|
PSU
|
6-200
|
12.5-120
|
20-76
|
40-38
|
60-25
|
100-15
|
150-10
|
300-5
|
400-3.8
|
600-2.6
|
| Output ratings |
| Rated outputvoltage (*1) (V) |
6 |
12.5 |
20 |
40 |
60 |
100 |
150 |
300 |
400 |
600 |
| Rated outputcurrent (*2) (A) |
200 |
120 |
76 |
38 |
25 |
15 |
10 |
5 |
3.8 |
2.6 |
| Rated outputpower (W) |
1200 |
1500 |
1520 |
1520 |
1500 |
1500 |
1500 |
1500 |
1520 |
1560 |
| Ripple and noise(*5) |
| CVp-p( 10 ~20MHz) p-p (*6) (mV) |
60 |
60 |
60 |
60 |
60 |
80 |
100 |
150 |
200 |
300 |
| CVrms(5Hz ~1MHz) r.m.s. (*7) (mV) |
8 |
8 |
8 |
8 |
8 |
8 |
10 |
25 |
40 |
60 |
| CCrms(5Hz ~1MHz) r.m.s.(*12) (mA) |
400 |
240 |
152 |
95 |
75 |
45 |
35 |
25 |
17 |
12 |
| Load regulation |
| Voltage(*4)(mV) |
2.6 |
3.25 |
4 |
6 |
8 |
12 |
17 |
32 |
42 |
62 |
| Current(*11)(mA) |
45 |
29 |
20.2 |
12.6 |
10 |
8 |
7 |
6 |
5.76 |
5.52 |
| Line regulation |
| Voltage(*3)(mV) |
2.6 |
3.25 |
4 |
6 |
8 |
12 |
17 |
32 |
42 |
62 |
| Current(*3)(mA) |
22 |
14 |
9.6 |
5.8 |
4.5 |
3.5 |
3 |
2.5 |
2.38 |
2.26 |
| Analog Programming and Monitoring |
| Externalvoltage control output voltage |
Accuracy and linearity: ±0.5% of rated output voltage. |
| Externalvoltage control output current |
Accuracy and linearity: ±1% of rated output current. |
| Externalresistor control output voltage |
Accuracy and linearity: ±1% of rated output voltage. |
| Externalresistor control output current |
Accuracy and linearity: ±1.5% of rated output current. |
| Output voltagemonitor |
Accuracy: ±1% |
| Output currentmonitor |
Accuracy: ±1% |
| Shutdowncontrol |
Turns the output off with a LOW (0V to 0.5V) or short-circuit. |
| Output on/off control |
Possible logic selections: |
| Turn the output on using aLOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to5V) or open-circuit. |
| Turn the output on using aHIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to |
| Alarm clearcontrol |
Clear alarms with a LOW (0V to 0.5V) or short-circuit. |
| CV/CC/ALM/PWRON/OUT ON indicator |
Photocoupler open collector output;Maximum voltage 30V, maximum sink current 8mA. |
| Trigger out |
Maximum low level output = 0.8V; minimumhigh level output = 2V; Maximum source current = 8mA. |
| Trigger in |
Maximum low level input voltage = 0.8V;minimum high level input votage = 2V, Maximum sink current = 8mA. |
| Front Panel |
Display, 4digits,
Voltage accuracy (0.1%+mV) |
12 |
25 |
40 |
80 |
120 |
200 |
300 |
600 |
800 |
1200 |
| Current accuracy (0.2%+mA) |
600 |
360 |
228 |
114 |
75 |
45 |
30 |
15 |
11.4 |
7.8 |
| Indications |
GREEN LED’s: CV, CC, V, A, VSR, ISR, DLY, RMT, LAN, M1, M2, M3,RUN,OutputON |
| |
RED LED’s: ALM, ERR |
| Buttons |
Lock/Local(Unlock), PROT(ALM_CLR),Function(M1), Test(M2), Set(M3), Shift, Output |
| Knobs |
Voltage, Current |
| USB port |
Type A USB connector |
| Transient response time (*10) |
| Transientresponse time (ms) |
1.5 |
1 |
1 |
1 |
1 |
1 |
2 |
2 |
2 |
2 |
| Output response time |
| Rise time (*8) |
| Rated load(ms) |
80 |
80 |
80 |
80 |
80 |
150 |
150 |
150 |
200 |
250 |
| No load (ms) |
80 |
80 |
80 |
80 |
80 |
150 |
150 |
150 |
200 |
250 |
| Fall time(*9) |
| Rated load (ms) |
10 |
50 |
50 |
80 |
80 |
150 |
150 |
150 |
200 |
250 |
| No load (ms) |
500 |
700 |
800 |
1000 |
1100 |
1500 |
2000 |
2500 |
3000 |
4000 |
| Programming and Measurements (RS-232/485, USB, LAN, GPIB) |
| Programming accuracy |
| Outputvoltage (0.05%+mV) |
3 |
6.25 |
10 |
20 |
30 |
50 |
75 |
150 |
200 |
300 |
| Output current(0.2%+mA) |
200 |
120 |
76 |
38 |
25 |
15 |
10 |
5 |
3.8 |
2.6 |
| Programming resolution |
| Output voltage(mV) |
0.2 |
0.4 |
0.7 |
1.3 |
2 |
3.4 |
5.2 |
10.2 |
13.6 |
20.4 |
| Output current(mA) |
6 |
4 |
2.5 |
1.2 |
0.8 |
0.5 |
0.34 |
0.19 |
0.13 |
0.09 |
| Measurement accuracy |
| Output voltage(0.1%+mV) |
6 |
12.5 |
20 |
40 |
60 |
100 |
150 |
300 |
400 |
600 |
| Output current(0.2%+mA) |
400 |
240 |
152 |
76 |
50 |
30 |
20 |
10 |
7.6 |
5.2 |
| Measurement resolution |
| Output voltage(mV) |
0.2 |
0.4 |
0.7 |
1.3 |
2 |
3.4 |
5.2 |
10.2 |
13.6 |
20.4 |
| Output current(mA) |
6 |
4 |
2.5 |
1.2 |
0.8 |
0.5 |
0.34 |
0.19 |
0.13 |
0.09 |
| Temperature coefficience |
| Voltage (ppm/℃) |
100ppm/℃ after a 30 minute warm-up |
| Current (ppm/℃) |
100ppm/℃ after a 30 minute warm-up |
| Remote sense compensation voltage(single wire) |
| voltage |
1 |
1 |
1 |
2 |
3 |
5 |
5 |
5 |
5 |
5 |
| Protection Function |
| Over voltage protection(OVP) |
| Setting range(V) |
0.6 – 6.6 |
1.25 – 13.75 |
02월 22일 |
4 – 44 |
5 – 66 |
5 – 110 |
5 – 165 |
5 – 330 |
5 – 440 |
5 – 660 |
| Settingaccuracy (mV) |
60 |
125 |
200 |
400 |
600 |
1000 |
1500 |
3000 |
4000 |
6000 |
| Over current protection(OCP) |
| Setting range(A) |
5 – 220 |
5 – 132 |
5 – 83.6 |
3.8 – 41.8 |
2.5 – 27.5 |
1.5 – 16.5 |
1 – 11 |
0.5 – 5.5 |
0.38 – 4.18 |
0.26 – 2.86 |
| Settingaccuracy (mA) |
4000 |
2400 |
1520 |
760 |
500 |
300 |
200 |
100 |
76 |
52 |
| Under voltage limit(UVL) |
| Setting range |
0 – 6.3 |
0 – 13.12 |
0 – 21 |
0 – 42 |
0 – 63 |
0 – 105 |
0 – 157.5 |
0 – 315 |
0 – 420 |
0 – 630 |
| Overtemperature protection(OHP) |
Turn the output off. |
| Incorrectsensing connection protection (SENSE) |
Turn the output off. |
| Low AC inputprotection (AC-FAIL) |
Turn the output off. |
| Shutdown (SD) |
Turn the output off. |
| Power limit(POWER LIMIT) |
Over power limit. |
| Approx. 105% of rated output power |
| Interface Capabilities |
| USB |
TypeA: Host, TypeB: Slave, Speed:1.1/2.0, USB Class: CDC(Communications Device Class) |
| LAN |
MAC Address, DNS IP Address, UserPassword, Gateway IP Address, Instrument IP Address, Subnet Mask |
| RS-232 /RS-485 |
Complies with the EIA232D / EIA485Specifications |
| GPIB (FactoryOption) |
SCPI – 1993, IEEE 488.2 compliantinterface |
| Isolated Analog Control Interface (Factory Option) |
| VoltageControl |
Using 0-5V or 0-10V signals forprogramming and measurement |
| CurrentControl |
Using 4-20mA current signals forprogramming and measurement |
| Environmental Conditions |
| Operatingtemperature |
0˚C to 50˚C |
| Storagetemperature |
-25˚C to 70˚C |
| Operatinghumidity |
20% to 85% RH; No condensation |
| Storagehumidity |
90% RH or less; No condensation |
| Altitude |
Maximum2000m |
| Input Characteristics |
| Nominal inputrating |
100Vac to 240Vac, 50Hz to 60Hz, single phase |
| Input voltagerange |
85Vac ~ 265Vac |
| Inputfrequency range |
47Hz ~ 63Hz |
| Maximum inputcurrent (A) |
21(100Vac) / 11(200Vac) |
| Inrush current |
Less than50A. |
| Maximum inputpower (VA) |
2000 |
| Power factor |
0.99 / 0.98 |
| Efficiency(*13) (100Vac / 200Vac) (%) |
77 / 79 |
82 / 85 |
83 / 86 |
84 / 87 |
84 / 87 |
84 / 87 |
84 / 87 |
84 / 87 |
84 / 87 |
84 / 87 |
| Hold-up time |
20ms or greater |
| General |
| Weight |
Less than 8.7kg (main unit only) |
| Dimensions |
423(W)×43.6(H)×447.2(D) mm |
| Cooling |
Forced air cooling by internal fan. |
| EMC |
Complies with the European EMC directive89/336/EEC for Class A test and measurement products. |
| Safety |
Complies with the European Low VoltageDirective 73/23/EEC and carries the CE-marking. |
| Withstand voltage |
AC to Chassis : 1500Vac / 1min |
| AC to Output terminal :3000Vac / 1min |
| Vout≦150V |
| Output terminal to Chassis: 1000Vdc / 1min |
| 150≦600<> |
| Output terminal to Chassis: 1500Vdc / 1min |
| Insulationresistances |
Chassis and output terminal; chassis andAC input; AC input and output terminal: 100MΩ or more (DC 1000V) |
