| • Application for GDS-3000 demo and oscilloscope training
• 5Vdc Power Input (Support USB Power, interface Type B) |
|
The GDB-03 training kit allows you to learn both the basic and the advanced functions of the GDS-3000 Series Digital Storage Oscilloscope (DSO). Following the training procedures of this training kit, you will quickly understand the basic operations of a DSO, and the unique features of the GDS-3000 Series, which represents a typical hi-tech DSO today.
The GDB-03 training kit is a signal generator board capable of producing waveforms, which contain various real-life scenarios you might encounter.
With the GDB-03 training kit and the included curriculums, you are able to acquire adequate knowledge in using a DSO with advanced features.
|
| 제품사양 |
| 신호 출력 |
| 3종류 직렬 버스 신호 |
| 9종류 기본 테스트 신호 |
| 17종류 고급 테스트 신호 |
| 기본 오실로스코프 트레이닝 |
| Lab1. 파형 연결 및 확인 |
| Lab2.프로브 보상 (1kHz 구형파) |
| Lab3.파형 스케일 및 위치 조정 (구형파) |
| Lab4.수동 파형 측정 (구형파; 주파수카운터, 커서 측정) |
| Lab5.자동 파형 측정 (노이즈 기능; 자동측정, 커서 측정) |
| Lab6.VPO (VPO 신호, 컬러/그레이 모드) |
| Lab7.오토셋 기능 (Fit Screen, ACpriority 기능) |
| Lab8.오토레인지 기능 |
| Lab9.하드카피 기능을 사용한 데이터 저장 |
| 고급 오실로스코프 트레이닝 |
| Lab1. 자동 파형 측정 (게이팅 측정) |
| Lab2.피크 검출(Peak Detect) 모드 |
| Lab3.느린 신호 파형 측정 |
| Lab4.노이즈 신호 측정 |
| Lab5.줌 타임베이스 기능 사용법 |
| Lab6.과도 신호 측정 |
| Lab7.리사쥬(Lissajous) 파형 & 위상측정 |
| Lab8.Runt 트리거 |
| Lab9.Video 트리거 |
| Lab10.Rise & Fall 트리거 |
| Lab11.Pulse Width 트리거 |
| Lab12.홀드 오프 기능 |
| Lab13.창분할 기능 1 |
| Lab14.창분할 기능 2 |
| Lab15.UART 신호 |
| Lab16.I2C 신호 |
| Lab17.SPI 신호 |
| 입력 전원 |
| 5V DC, USB 또는 보조 전원 입력 |
| 기본 액세서리 | |
| CD x 1, GTL-246 : USB 2.0 AB 타입 케이블 |
문의사항은 월요일-금요일(주 5일) 기술지원팀으로 문의주십시오.
031-360-4282
기술 지원, 판매 연락 또는 제품 견적 요청 atm@atminc.co.kr