Programmable DC Electronic Load Model 63000 Series 요약정보 및 구매

상품 선택옵션 0 개, 추가옵션 5 개

제조사 Chroma


등록된 상품이 없습니다.

제품 정보

제품 기본설명

제품 상세설명

Key Features:
-Rated power: 250W, 350W
-Voltage range: 150V
-Current range: 60A max.
-CC, CR, CV & CP operation modes
-User-defined waveforms (UDW)
-CZ mode for turn on capacitive loadsimulation
-Real time power supply load transient response simulation
-User programmable 100 sequences via front panel
-High precision voltage & current measurement
-Voltage, current & Pmax measurement for OCP/OLP test
-Timing & discharging measurement for batteries
-Short circuit simulation
-Smart fan control
-Full protection: OC (adjustable), OT, OP (adjustable) protection & OV warning, polarity reverse alarm
-Standard USB, optional Ethernet and GPIB interfaces
Programmable DC Electronic Load Model 63000 Series

The 63000 Series programmable DC electronic loads are reliable, precision instruments primarily designed to test switching power suppl ies, A/D power suppl ies, power electronic components, adapters, 3C batteries and chargers. Its maximum 350W rated power makes it suitable for testing numerous types of lower power devices.

The 63000 Series offers models in two operating voltages 150V models, with 250W and 350W power levels up to 60A in a single unit. Their compact and light weight design make these loads easy to move around which is ideal for R&D and design validation.

Each model of the 63000 Series has unique user-def ined waveform (UDW) funct ion capable of simulating real-world custom waveforms. In addition, a data storage function has been built in for saving and recalling up to 100 stored settings at any time. For automated testing, these save and recall functions can save a great deal of time.

The 63000 Series has 3 power ranges that can precisely measure the voltage and current in real time. Since short circuit testing is a critical test item, the 63000 provides short circuit simulation to effectively address application demands for power and automated testing.

With the LCD and rotary knob, the 63000 loads offer versatile front panel operation. For remote operation, users are able to control each model via standard USB or optional Ethernet/LXI and GPIB interfaces. PWM fan speed control has been embedded to reduce ambient noise.

The 63000 has been equipped with over current, overpower, and over temperature protections as well as over voltage and polarity reverse alarms to improve product reliability. These DC loads are reliable, precision inst ruments ideal for design validation testing and automated test system integration.

Static Load
CC Mode
CR Mode
CV Mode
CP Mode
Dynamic Load
  • Programmable parameters: Current high/low level, T1/T2, rise/fall rate and execution times.
  • Execution time setting range is 1 ~ 65,535.
  • Suitable for testing D/D converters.
  • 150V model’s current rise minimum response time is 20μs.
  • One shot impulse current is loaded when it is set to execute once, which is very suitable for testing instant large withstand current of batteries

Dynamic Change up to 25kHz

One Shot Impulse Current
CZ Mode (Available in May, 2018)
To avoid charging the motherboard capacitors when the switching power supply powers on with surge current triggering the power supply over current protection mechanism making the power supply fail to turn on successfully, the power supply requires conducting a turn on capacitive load test. The 63000 Series provides CZ mode for turn on capacitive load simulation to tackle this testing demand. CZ mode simulates the actual inductance, impedance and capacitance for loading making the load current closer to real conditions.
Three Ranges and High Precision Measurement
  • High, medium and low three operating and measurement ranges.
  • Voltage, current and power measurement specifications:
    • 0.02%+0.02%F.S. accuracy for voltage
    • 0.05%+0.05%F.S. accuracy for current
    • 0.1%+0.1%F.S. for power
User-Defined Waveform (UDW) (Available in May, 2018)

The conventional way of loading a current waveform is through DAQ cards or function generators. The 63000 Series provides an enhanced feature, User Defined Waveform (UDW), to simulate the actual current profiles and waveforms. Each load is capable of storing up to 10 sets of waveforms with each containing up to 1.5 million data points in the built-in flash memory. It also provides voltage peak measurement during actual loading conditions avoiding the need for an oscilloscope which saves time and cost.

Battery Discharge Testing (Available in May, 2018)
  • Three discharge modes: CC, CR and CP.
  • Set cut off voltage and time (1~100,000 sec.) to stop loading and ensuring the battery is not damaged due to over discharge
  • Measures the battery discharge power (WH, AH) and total discharge time
  • Applies to super capacitor for discharge time testing and other related applications
Battery Discharge Power (WH & AH) Calculation
Program Sequence

The 63000 Series have a program sequence function for various load condition simulations. The minimum dwell time is 100μs. The following lists the applications for common programmed sequences:

  1. Battery discharge (NPC, electric car, and electric locomotive, etc.) simulating various dynamic load current waveforms.
  2. Switching power supply mixed load modulation.
User-defined Hot Key Design
  • 5 sets of user-defined hot keys
  • Enter the operation mode quickly
Over Current & Over Power Testing (Available in May, 2018)
  • Set current orders to test overcurrent protections
  • Set power orders to test overpower protections
  • Automatic judge the test reslt as Pass or Fail
  • Capture the maximum power (Pmax) during testing
  • Verify the correctness of designed overcurrent and overpower without using an oscilloscope
  • Saves a lot of testing time
Graphical Operation Software (Available in July, 2018)

User friendly software controls all functions of the 63000 loads and is easy to understand and operate. The 63000 Series can be controlled via standard USB or optional GPIB/Ethernet interface for remote control and automated testing applications.

Panel Description

1. Power Switch - Electronic load AC power switch
2. Shortcut Keys - Loading mode switch
3. Arrow Keys and Enter/Edit - Key Moving cursor and selecting menu
4. Remote Sense Connections
5. Load Positive/Negative Terminal
6. USB HOST (not available yet) - For user-defined waveform and programmed sequence data download as well as firmware upgrade
7. LCD Display - Setup, measurement and load state information display
8. Rotary Knob - Editing the setting to be input
9. Function Keys and ENTRY Keypad - Including numerical keys and ENTER key, MODE, COFIG./EDIT, SHORT, RECALL, SAVE and CLEAR

10. Analog Outputs - Proportional voltage and current waveforms
11. GPIB & Ethernet Card Slot
12. USB Port
13. AC Input Connector

추가옵션 악세사리

선택 가능한 추가옵션
옵션명 옵션정보
63003-150-40 Programmable DC Electronic Load 150V / 40A / 250W
63004-150-60 Programmable DC Electronic Load 150V / 60A / 350W
추가 구성 악세사리
악세사리 코드 악세사리 정보
A630000 Graphic user interface softpanel for 63000 Series
A636000 GPIB interface
A636010 Ethernet interface

카탈로그 / 매뉴얼

제품 카탈로그 제품 매뉴얼 ACROBAT PDF 리더
카탈로그 다운로드
등록되지 않았습니다. PDF Reader 다운로드


관련자료 다운로드


등록된 상품문의

상품문의가 없습니다.