-
Key Features:
-Max Power: 200W, 100W×2(Dual), 30W & 250W, 300W, 600W, 1200W
-Wide range 0~600V operating voltage
-Compatibility between 6310 and 6310A
-Up to 8 channels in one mainframe, for testing multiple output SMPS
-Parallel load modules up to 1200W for high current and power application
-Synchronization with multiple loads
-Flexible CC, CR, CP and CV operation modes
-Dynamic loading with speeds up to 20kHz
-Fast response of 0.32mA/μs~10A/μs slew rate
-Minimum input resistance allowing load to sink high current at low voltage
-Real time power supply load transient response simulation and output measurement
-User programmable 100 sequences. Front panel input status for user-friendly operating
-High/Low limits of testing parameters to test GO/NG
-Digital I/O control
-Over current protection (OCP) testing function
-16-bit precision voltage and current measurement with dual-range
-Remote sensing capability
-Short circuit test
-Self-test at power-on
-Full Protection: OC, OP, OT protection and OV alarm
-USB, GPIB & RS-232 interfaces
-
Key Features:
-Max. Power : 100W x 2(Dual), 300W & 400W
-Voltage Range : up to 600V
-5 module mainframe Max. 2000W, load modules up to 400W/ea
-Up to 10 channels in one mainframe, fit for testing multiple output SMPS
-0.4V @ 80A (Typical) low voltage operating characteristics
-Flexible CC, CR, CV and CP operation modes
-CZ mode for turn on capacitive load simulation
-Parallel mode for high current and power application up to 2kW
-User defined waveform
-Multi Channel synchronous control
-Auto frequency sweep up to 50kHz
-Real time power supply load transient response simulation and Vpk+/- measurement
-User programmable 100 sequential front panel input status for user-friendly operating
-Precision voltage and current measurement
-Precision high speed digitizing measurement/data capture
-Voltage, Current and Pmax measurement for OCP/OLP testing
-Timing measurement for batteries
-Short circuit simulation
-Self-test at power-on
-Full Protection : OC, OP, OT protection and OV alarm
-Ethernet, USB and GPIB interfaces
-
Key Features:
-NEW! The latest 100V wide range of models (applicable to 40V/50V/60V/80V/100V models)
-Power range: 5KW / 10KW / 15KW
-Voltage range: 0 ~ 1000V
-Current range: 0 ~ 375A
-High power density (15KW in 3U)
-Easy master / slave parallel & series operation up to 150KW
-Precision V&I Measurements
-High-speed programming
-Voltage & Current slew rate control
-Digital encoder knobs, keypad and function keys
-Current sharing operation
-Voltage ramp function (time range: 10 ms ~ 99 hours)
-Auto sequencing programming:10 programs / 100 sequences
-OVP, current limit, thermal protection
-Standard analog programming interface
-Standard USB / RS232 / RS485 interface
-Optional GPIB / Ethernet interface
-Remote output ON / OFF (I / P)
-Remote sense line drop compensation
-LabView and Labwindows
-Solar array simulation function
-Shade I-V curve simulation
-I-V curve programming: 10 program / 100 I-V files
-CE certified
-
Key Features:
-Voltage Range : 150/300/500 Vrms
-Current Range :
-Model 66201 - 0.01/0.1/0.4/2 Arms
-Model 66202 - 0.01/0.1/0.4/2 Arms ; 0.2/2/8/20 Arms
-Frequency Range : DC, 15Hz~10kHz
-Embedded high speed DSP, 16 bits Analog/Digital converters
-10 mA minimum current range & 0.1mW power resolution
-Meets ENERGY STAR / EN 50564:2011/IEC 62301:2011 / ErP measurement requirements
-Accumulated energy methods for unstable power measurement
-User-define criteria provides automatic PASS/FAIL indications
-Half rack width and 2U height, suitable for system integration
-Dual current shunt design provides high accuracy over a wide current range (Model 66202)
-THD and user-specify order distortion measurement (Model 66202)
-Inrush current and energy measurement (Model 66202)
-Interface options : USB or USB+GPIB
-Voltage/ Current harmonics measurement up to 50 orders
-
Key Features:
-Voltage Ranges : 15/30/60/150/300/600 Vrms,1200Vrms (optional kit)
-Current Ranges : 0.005/0.02/0.05/0.2/0.5/2/5/20 Arms
-Frequency Range : DC, 15Hz~10kHz
-Embedded high speed DSP, 16 bits Analog/Digital converters
-Half rack size, up to 4 input modules
-Supports various single and 3 phase wiring configurations (see diagram)
-Supports external shunt and CT for higher current applications
-5 mA minimum current range & 0.1mW power resolution
-Meets ENERGY STAR / EN 50564 / IEC 62301 / ErP / SPEC Power
-Includes accumulated energy methods for unstable power measurement
-User-define criteria provides automatic PASS/FAIL indications
-Dual current shunt design provides high accuracy over a wide current range
-THD and user-specify order distortion measurement
-Inrush current and energy measurements
-Voltage / Current harmonics measurements up to 50 orders
-Support ultra high precision DCCT 60A/200A optional kit for high current measurement application